Extra Options Can Be Selected Using The Extras Sensor Control; Pre-Wash; Soak; Intensive - Miele WCG 360 Operating Instructions Manual

Extra options
Extra options can be selected
using the Extras sensor control
Selecting extra options in the display
 Touch the Extras sensor control.
The following appears in the display:
Extras
 Touch the  sensor controls until
the extra option you want appears in
the display.
 Confirm the extra option with the
OK sensor control.
The extra option will be given a  next
to it.
Deselecting an extra option
 Touch the Extras sensor control.
The first extra option which can be se-
lected appears in the display.
 Touch the  sensor controls until
No Extras appears in the display.
 Confirm
No Extras
control.
The previously selected extra option is
now deselected.

Pre-wash

For laundry with large amounts of dirt,
e.g. dust and sand.
46
with the OK sensor

Soak

For heavily soiled and stained items
with protein stains.
A duration of between 30 minutes and
6 hours in 30-minute increments can be
selected for the soak process. See
No
"Settings" for more information.
The factory default setting is
30 minutes.

Intensive

For hard-wearing laundry that is very
heavily soiled. Cleaning efficiency is in-
creased through more intense mechan-
ical action and the application of more
heat energy.

Extra quiet

This option reduces noise levels during
the wash programme. Use this if you
want to wash during quiet periods (for
instance when children are sleeping).
The final spin is automatically reduced
to  (Rinse hold). The programme
duration is increased.

Extra gentle

Drum rotation and wash duration are re-
duced. Lightly soiled fabrics are
washed more gently.

AllergoWash

This option should be used where high
standards of hygiene are required. En-
ergy consumption is increased to
lengthen temperature holding times and
water consumption is increased to im-
prove rinsing efficiency. The items must
be suitable for drying in a tumble
dryer   and suitable for ironing 
.