Page 1
Installation Instructions 230-volt, 50-Hz Washer for models 3RLBR8543 3RLSQ8000 3RGSC9455 3SLSQ7533 3RLSQ8533 Part No. 8318424 Rev. A IMPORTANT: Read and save these instructions. Installer: Leave Installation Instructions with the homeowner Homeowner: Keep Installation Instructions for future reference. Save Installation Instructions for local electrical inspector’s use.
Before you start Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
Drain system Untape and open washer lid. Remove packages and hoses from washer. Follow directions for your type of drain system. If a longer drain hose is needed, use drain hose extension kit (Part No. 285702). If drain hose must be shortened, use drain hose kit (Part No. 285442). All kits are available from authorized parts distributors.
Drain hose connection IMPORTANT: THIS PROCEDURE MUST BE FOLLOWED TO ASSURE PROPER INSTALLATION. 1/4" (.64 cm) To prevent the drain hose from coming off or leaking, it must be installed per the following instructions. • Wet the inside end of the drain hose (A) with tap water. DO NOT USE ANY OTHER LUBRICANT.
CORRECT ELECTRICAL SUPPLY AND RECOMMENDED EARTHING METHOD. Congratulations! You have successfully installed your new Whirlpool washer. To get the most efficient use from your new washer, read your Use and Care Guide. Keep Installation Instructions and Use and Care Guide.