Advertisement
Quick Links
Natural Gas (methane) Detector
Welcome to the Natural Gas Detector.
This guide is for use with the Natural Gas (methane) Detector,
Tunstall part number 69005/10.
What is the Natural Gas Detector?
The Natural Gas Detector has an integrated 869 MHz radio
module. The unit is mounted on a wall bracket - with moulded
screw holes. The product has been assembled and programmed
to simplify installation.
D6907021A0
69005/10
69005/10
69005/10
69005/10
1
Advertisement
Summary of Contents for Tunstall 69005/10
- Page 1 69005/10 Welcome to the Natural Gas Detector. This guide is for use with the Natural Gas (methane) Detector, Tunstall part number 69005/10. What is the Natural Gas Detector? The Natural Gas Detector has an integrated 869 MHz radio module. The unit is mounted on a wall bracket - with moulded screw holes.
- Page 2 How to install the Natural Gas Detector We recommend the installation to be carried out by competent personnel as an incorrect detector installation position can reduce the detector’s effectiveness. 1. Decide on the location of the Natural Gas Detector and ensure it meets the guidelines of the manufacturer’s manual found inside the box.
- Page 3 DO NOT REMOVE THE COVER FROM THE NATURAL GAS DETECTOR WHEN THE DETECTOR IS CONNECTED TO MAINS POWER. Pairing the Natural Gas Detector to a Tunstall Lifeline. 1. Place the Lifeline home unit into telecare sensor assign mode by pressing the green cancel button until the unit beeps and/or announces ‘Programming Mode’, then...
- Page 4 End to end test: 1. To test the detector's correct functioning and to ensure the successful pairing with the Tunstall Lifeline; use a certified mixture of sample gas and by verifying that the Lifeline announces and raises an alarm. Using a gas bottle with maximum concentration of 25% LEL Methane balanced in air and set the gas flow at 0.5...
- Page 5 Write the ‘replace by date’ on the label of the Natural Gas Detector. (Note: Natural Gas Detector should be replaced after 4 years of service). Maintenance and Inspection: The Natural Gas detector should be maintained and inspected at regular intervals in line with the manufacturer’s manual. Service Information The Natural Gas Detector contains no user serviceable parts.
- Page 6 Declaration of conformity Declaration of conformity Declaration of conformity Declaration of conformity Tunstall declare that the radio equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following address: uk.tunstall.com/approvals uk.tunstall.com/approvals...
- Page 7 This page is intentionally left blank D6907021A0...
- Page 8 ATTENTION! ATTENTION! ATTENTION! ATTENTION! If an alarm occurs: If an alarm occurs: If an alarm occurs: If an alarm occurs: In case of alarm please keep calm and carry out the following actions, not necessarily in the order given: 1. Turn off the gas supply at the gas main control and/or the storage tank 2.