Changing The Control; Adjusting The Refrigerator - Whirlpool TT18HK Use And Care Manual

chart below as a guide. If you have ques-
tions, call our Consumer Assistance Center
number. (See page 19.)
l
Then adjust the Freezer Control if needed.
CONDITION:
If Refrigerator
Section is
TOO WARM
If Freezer
Section is
TOO WARM
If Refrigerator
Section is
TOO COLD
REASON:
Door
opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
(can't cycle often enough)
Controls not set correctly
for your conditions
RECOMMENDED
CONTROL SElTINGS:
Refrigerator 6
Freezer
D
Refrigerator
Freezer :
Refrigerator 2
Freezer
A
If ICE isn't
MADE FAST
ENOUGH
If BOTH
SECTIONS
are TOO WARM
Heavy ice usage
Very cold room temperature
(can't cycle often enough)
Door opened often
Large amount of food added
Very warm or very cold room
temperatures
Refrigerator
Freezer
i
Refrigerator
Freezer
:
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way
you use your refrigerator.
To remove glass shelves:
1. Remove items from shelf.
2. Tilt shelf up at front.
3. Lift back of shelf.
4. Pull shelf straight out.
To replace glass shelves:
1. Guide the rear shelf hooks into the slots
in the shelf supports on cabinet wall.
2. Tilt shelf up at front until hooks drop into
slots. Lower front of shelf to level position.
Changing the control settings
If you need to adjust temperatures in refrig-
l
Adjust the Refrigerator Control first.
erator or freezer, use the settings listed in the
. Wait at least 24 hours between adjustments.