Install Properly; Level Refrigerator-Freezer; Remove Soles Labels; Clean It - Whirlpool ET22MT Use & Care Manual

Install proI ,erly.. .
T-k -
i- IL1,1L_i
-
For ease of installatron allow 92" [ 1.25 cm] space
between counters and cabinets and the sides and
top of the refrigerator.
The refrigerator back can be flush against the
wall.
If the refrigerator is to be against a wall, you might
want to leave enough space so the door can be
opened wider.
Level refrigerator-freezer.. .
Use Screwdriver
Right to Raise;
Left to Lower
I, Remove base grille (see page 8).
2. To raise front, turn each screw to the right.
3. To lower front, turn each screw to the left.
4. Check with level.
Remove sales labels.. .
Remove the Consumer Buy Guide label and other
inside labels before using the refrigerator. Any glue
left can be taken off with rubbing alcohol
Clean it.. .
Clean your refrrgerator before using it. See clean-
ing instructions on page 8.
Plug it in...
wall receptacle
Refrigerator
Power Cord
Recommended
Grounding Method
A 115 Volt, 60 Hz., AC only, 15 or 20 ampere fused
electrical supply is required. It is recommended that
a separate circuit serving only this appliance
be provided.
Do not use an extension cord. Use a receptacle
which cannot be turned off with a switch or pull
chain. See individual electrtcal requirements and
groundrng instruction sheet in your literature
package.