Adjusting The Refrigerator Shelves; Removing The Meat Drawer And Cover - Whirlpool ET18SK Use And Care Manual

No-frost refrigerator-freezer
Hide thumbs Also See for ET18SK:
Table of Contents

Advertisement

Adjusting
the refrigerator
shelves
Shelves can be adjusted to match the way you
use your refrigerator.
To remove shelves:
1. Remove items from shelf.
2. Tilt shelf up at front.
3. Lii back of shelf.
4. Pull shelf straight out.
To replace shelves:
1. Guide the rear shelf hooks into the slots in the
shelf supports on cabinet wall.
2. Tilt shelf up at front until hooks drop into slots.
Lower front of shelf to level position.
Removing
the meat drawer
and cover
The meat drawer and cover can be removed for
cleaning or moved to another shelf, if desired.
Remove the meat drawer first.
To remove the meat drawer:
Lift the fronS
then the back.
1. Slide the drawer straight out to the stop.
2. Lift the front.
3. Slide drawer out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Remove the meat drawer.
2. Tilt front of cover up.
3. Pull cover up and out.
To replace the cover:
1. Fit bottom notches of cover over rear and
center cross bars of shelf.
2. Lower cover into place.
3. Replace the meat drawer.
stop, litt the
front and pull
again.
9

Advertisement

Table of Contents
loading

Table of Contents