Removing The Trivet And Cover; Using The Ice Cube Trays - Whirlpool ET18SK Use And Care Manual

Removing the trivet and cover
The trivet can be removed for easier cleaning.
To remove the trivet:
1. Lii trivet up and out.
2. Replace trivet with higher edge toward the
rear of the refrigerator.
Lift
trivet
up
and out.
To remove the cover:
1. Lift front of cover.
2. Lift cover up and out.
To replace the cover:
1. Fii cover notches into supports on walls of
refrigerator cabinet.
2. Lower the front into place.
Lift
the honf
then the back.
Using the ice cube trays
If cubes are not used, they may shrink. The
moving cold air starts a slow evaporation. The
longer cubes are stored, the smaller they get.
To remove ice:
1. Hold tray at both ends.
2. Twist slightly.
10