Table of Contents
Advertisement
Changing the light bulb...
Adjusting the refrigerator
shelves...
Shelves can be adjusted
to match the way you
use your refrigerator.
Model
ET18GK has glass
shelves.
Glass shelves
are heavy.
Be careful.
Moving the meat pan and cover...
The meat pan can be taken out and moved
the
same way as the shelves. Remove
the meat pan
first
1. Reach behind
the control console
to find bulb.
2. Remove
bulb.
3. Replace
with a 40-watt appliance
bulb.
To
remove
the shelves:
1. Tilt up at front.
2. Loft up at back.
3. Pull shelf straight out.
To replace
the shelves:
1. Guide
the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop
into slot.
Lower front of shelf to level position.
To remove
the meat
pan and cover:
1. Slide meat pan out to the stop.
2. Lift the front of meat pan.
3. Slide pan the rest of the way out.
4. Tilt cover up at front.
5. Lift up at back.
6. Pull straight
out.
To replace
the meat pan and cover:
1. Guide the rear hooks of cover into the slots in the
shelf supports.
2. Tilt up front of cover
until rear hooks drop
into
slots. Lower front of cover to level position.
3. Replace
meat pan in reverse order of removal.
Removing crispers and crisper cover...
To remove
the crispers:
PULL OUT TO THE STOP. LIFT THE
PULL AGAIN.
LIFT THE FRAME FRONT,
1. Slide crisper straight out to the stop, lift front, then
slide the rest of the way out.
2. Replace
in reverse order.
To remove
the cover:
1. Push up glass insert from the bottom, then slide
out with both hands.
2. Lift front of cover
frame
and
remove
cover
support.
3. Lift out cover frame by pulling
up and out.
To
replace
the cover:
1. Fit back of cover into notch supports
on walls of
refrigerator,
then lower front into place.
2. Replace
cover support
with the long tab toward
the front. NOTE: If the support
needs
adjust-
ment, turn base
right to raise, or left to lower.
3. Slide back of glass insert into place,
then lower
front
Advertisement
Table of Contents
