Uslng Your Refrigerator; Setting The Control - Whirlpool ET14HJXDN01 Use And Care Manual

Leveling it
Your refrigerator has 2 front, adjustable rollers to
prevent rocking on uneven floors.
To adiust rollers:
I I
Use a mcrew-
1.
2.
3.
Roll refrigerator into position.
Adjust rollers by turning the leveling screws
located at the front of the base.
l
Turn clockwise to raise.
l
Turn counterclockwise to lower.
NOTE: Rollers are adjusted correctly when the
refrigerator no longer rocks when the doors are
opened or closed.
Repeat this procedure whenever the refrigerator
is moved.
NOTE:
If you want the doors to close easier, use the
rollers to raise the front of the refrigerator slightly.
Using Your Refrigerator
To obtain the best possible results from your refrigerator, it is important that you operate it properly. This section
tells you how to set the control, remove, and adjust the features in your refrigerator,
and how
to save energy.
Setting the control
The control for the refrigerator and freezer is in the
refrigerator. When you plug in the refrigerator for the
first time:
l
Set the Temperature Control to 3 (normal).
Temperature Control adjustments range from
1 (warmest) to 5 (coldest).
NOTE: Turning the Temperature Control to OFF
stops cooling in both the refrigerator and freezer
compartments, but it does not disconnect the refrig-
erator from the power supply.
Give the refrigerator time to cool down completely
before adding food. This could take several hours.
The setting indicated above should be correct for
normal household refrigerator usage. The control is set
correctly when milk or juice is as cold as you like and
when ice cream is firm.
NOTE:
The built-in exteriir moisture control continu-
ously guards against moisture buildup on the outside
of the refrigerator cabinet.
l/'-,3 normal
\
@
l
on
/
5 coldeot
5