Changing The Control Settings - Whirlpool ED22DL Use And Care Manual

No-frost refrigerator-freezers with thirstcrusher
Table of Contents

Advertisement

-
3. Give the refrigerator time to cool down
completely before adding food. This may
take several hours.
The settings indicated above should be
correct for normal, household refrigerator
usage. The controls are set correctly
when milk or juice is as coM as you like
and when ice cream is firm. If you need to
adjust these settings, see "Changing the
control settings" below.
NOTE:
The Automatic Exterior Moisture
control continuously
guards against moisture
build-up on the outside of your refrigerator
cabinet. This control does not have to be set
or adjusted.
Changing
the control
settings
If you need to adjust temperatures
in
in the chart below
as a
guide. If you have
questions, call our Consumer Assistance
refrigerator or freezer, use the settings listed
Center number, 1-800-253-l 301.
l
Adjust the Refrigerator Control first.
l
Then adjust the Freezer Control if-needed.
l
Wait at least 24 hours between adjustments.
RECOMMENDED
CONDITION:
REASON:
CONTROL SElTlNGS:
Refrigerator
section
too warm
l
Door opened often
l
Large amount of food added
l
Room temperature too warm
Refrigerator
4
Freezer
A
Freezer
section
too warm
Refrigerator
section
too cold
l
Door opened often
l
Large amount of food added
l
Very cold room temperature
(can't cycle often enough)
l
Controls not set correctly
for your conditions
Refrigerator
3
Freezer
C
Refrigerator
2
Freezer
B
Ice not
made fast
enough
l
Heavy ice usage
l
Very cold room temperature
(can't cvcle often enouah)
Refrigerator
3
Freezer
C
Both
sections
too warm
l
Door opened often
l
Large amount of food added
l
Very warm or very cold room
temperatures
Refrigerator
4
Freezer
B
8

Advertisement

Table of Contents
loading

Table of Contents