Changing The Light Bulbs - Whirlpool ED20PK ED22PK Use And Care Manual

Changing the light bulbs
Electrical
Shock
Hazard
Before removing a light bulb, either
unplug the refrigerator or disconnect
the electricity leading to it at the main
power supply.
Failure to do so could
result in
personal injury.
To
change refrigerator Ilght:
1.
Disconnect refrigerator from power supply.
2. Reach behind the Control Console to
remove bulb.
3. Replace bulb with a
40-watt
appliance bulb.
4. Reconnect refrigerator to power supply.
To
change crisper light
(ED22PK
only):
1. Disconnect refrigerator from power supply.
2. Pull top of light shield forward until it snaps
free.
3. Lower light shield to clear bottom supports.
4. Pull light shield straight out to remove.
5. Replace bulb with a 40-watt appliance bulb.
6. Replace light shield in reverse order.
7. Reconnect refrigerator to power supply.
To
change freezer light:
1.
Disconnect refrigerator from power supply.
2. Push in sides of light shield until it snaps
free.
3. Replace bulb with a 40-watt appliance bulb.
4. Replace light shield.
5. Reconnect refrigerator to power supply.
NOTE: Not
all
commercial appliance bulbs
will fit your refrigerator. Be sure to replace a
bulb with one of the same size
and
shape.
risper
light
15