Pioneer DDJ-ERGO Quick Start Manual page 3

VERSION 1.1
Looping
You have up to 8 loops per track in Serato DJ, and the choice between either
manual or auto loops. You can choose whether you have 4 loops (and 4 cuepoints)
showing on screen, or 8 loops. To switch between Manual and Auto looping, click
(Manual) or (Auto) onscreen. Use the IN/OUT buttons for manual looping and
the AUTO LOOP knob for auto looping
Manual Mode
DDJ-ERGO-V
Loop IN
Loop IN
Loop OUT
Loop OUT
AUTO LOOP
NOTE The best way to edit the start and end points of a manual loop is with the jog
wheel/platter on your DDJ-ERGO-V.
Auto Mode
DDJ-ERGO-V Control
Press AUTO LOOP
Twist AUTO LOOP left
Twist AUTO LOOP right
NOTE You can also save a loop to the next available free loop slot in the software.
To do this, either click the button in the manual/auto loop tab or click
available loop slot. Your loops are saved to the file and recalled the next time it is
loaded. They are not lost if the file is moved or renamed.
Serato DJ Function
Set loop in point (Loop not active)
Adjust loop in point (Loop active)
Set loop out point (Loop in point set)
Adjust loop out point (Loop active)
Exit Manual Loop
Serato DJ Function
Start Auto Loop
Half Auto Loop length
Double Auto Loop length
DJ-FX
The DJ-FX in Serato DJ are powered by iZotope™. Click the FX tab
to open the FX panel. Select either 1, 2 or M in the Deck Assign area
to assign the selected effect bank to a deck or Master Output. To activate an effect,
click the ON button on your FX UNIT in the software, or the ON button on your
controller. You can adjust effect parameters by using either software controls, or
the FX1 and FX2 knobs and buttons on your controller
DDJ-ERGO-V Controls
ON
SHIFT + ON
FX Knob 1
FX Button 1
FX Knob 2
FX Button 2
FX Knob 3
FX Button 3
DDJ-ERGO-V Controls
Hold FX Button 3 for 1 second
Tap FX Button 3 to the desired rate
FX Knob 3
on an
Serato DJ Parameters
Effect On/Off
Choose FX UNIT
Parameter 1 (Dial 1)
Parameter 2 (Button 1)
Parameter 3 (Dial 2)
Parameter 4 (Button 2)
Parameter 5 (Dial 3)
Parameter 6 (Button 3)
Beat Multiplier
Auto
Tap (Manual)
Beats Dial