Removing The Crispers And Crisper Covers; Adjusting The Crisper Humidity Control - Whirlpool ED20DFXEB00 Use And Care Manual

Removing the crispers and crisper covers

To remove the crisper:
1. Slide crisper straight out to the stop.
2. Lift the front and slide out the rest of the way.
3. Replace in reverse order.
To remove the cover:
1. Hold cover firmly with both hands and lift front of
cover off supports.
2. Lift cover out by pulling up and out.
To replace the cover:
1. Fit back of cover into notch supports on walls of
refrigerator.
2. Lower front into place.

Adjusting the crisper humidity control

You can control the amount of humidity in the mois-
ture-sealed crisper. Adjust the control to any setting
between LOW and HIGH.
•
LOW (open) lets moist air out of the crisper for best
storage of fruits and vegetables with skins.
•
HIGH (closed) keeps moist air in the crisper for best
storage of fresh, leafy vegetables.
U SIN G YOU R REFR IGE RATO R
Remove the glass insert.
Lift the cover front, then
the back.
NOTE: Handle glass
insert with care. It is
heavy.
Humidity Control
High
Pull out to the stop, lift
the front, and pull again.
Low
15