Table of Contents
Advertisement
Using Your Refrigerator
Continued
EXTERIOR MOISTURE CONTROL
4
OFF l ON
b
Glass shelves
are
heavy.
Be careful.
Pull out to the stop, lift the
front and pull again.
6
Exterior
Moisture
Control
The Exterior Moisture Control on the Control
Console operates electric heaters around the door
openings. These heaters help keep moisture from
forming on the outside of the refrigerator.
1. Use the OFF setting when humidity is
low.
2. Use the ON setting if moisture forms on the
outside of the refrigerator.
Adjusting
the refrigerator
shelves
Shelves can be adjusted to match the way you use
your refrigerator. Glass shelves are strong enough
to hold bottles, milk and other heavy food items.
To remove
shelves:
1.
Remove items from shelf.
2. Tilt up at front.
3. Lift up at back.
4. Pull shelf straight out.
To replace
shelves:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
Removing
the freezer
shelf
To remove
shelf:
1. Lift front slightly.
2. Lift back off supports.
3. Replace in reverse order.
Moving
the meat drawer
and cover
To remove
the meat drawer:
1. Slide the meat drawer out to the stop.
2. Lift the front.
3. Slide the drawer the rest of the way out.
4. Replace in reverse order.
To remove
the cover:
1. Tilt front of cover up, lift at back, and pull
straight out.
2. Replace in reverse order.
Advertisement
Table of Contents
