EVGA GeForce RTX 2080Ti Installation Manual

Hardware Installation

Turn off your computer, disconnect the power cord and remove any existing graphics card(s).
1.
Attention:
It is very important that you wait until the graphics card has cooled down before taking the card out of the system.
Remove the slot covers that correspond to the PCIe slots you are installing the GeForce
2.
(if there was no existing graphics card).
3. Install the GeForce ® graphics card, as shown below. If this card is going into an SLI
directions for the number of cards you will be installing.
Note :
All of the graphics cards in an SLI
Install your first GeForce ® graphics card into the Primary PCIe x16 slot
(the Primary slot is the one closest to the CPU).
configuration must be identical.
®
graphics card in
®
® configuration, follow the
2-way SLI: Install your second GeForce
Connect the two cards together using a 2-way SLI bridge.
NVLink technology is only supported by each GPU Specification.
TM
® graphics card in the secondary PCIe x16 slot.