Inspect cords periodically and replace if damaged. Installation and Assembly ST-12F-DDF-E / ST-20F-DDF-E / ST-20FO-DDF-E / ST-24-DDF-E 1. Place the fan on level ground in a safe, desired position then connect to an approved power source.
Page 4
NEVER LEAVE A FAN UNATTENDED WHILE OPERATING OR WHILE CONNECTED TO A POWER SOURCE 30” PEDESTAL FAN: ST-30P-DDF-E Installation and Assembly 1. Place the Base on level ground Tools Needed: 2. Place the Support Spring and Spring Seat Pliers inside the bottom of the Support Pole, and Phillips head screwdriver mount the Support Pole to the Base.
Need help?
Do you have a question about the ST-12F-DDF-E and is the answer not in the manual?
Questions and answers