Table of Contents
Advertisement
6. Push the Start Time pad. The time of
day with the colon flashing will show in
the display. The Start Time Indicator
Light will light up, and the Cook Time
Indicator Light will flash.
7. Use the Hour and Minute pads to set
the desired start time. Push the “up” or
“down” pad(s) until the correct start time
shows in the display.
This example shows a desired start time
of 2 o’clock. The oven will automatically
shut off at 2:30 (the set start time plus
the set cook time).
8. Push the Start/Enter pad. The Delay
Indicator Light will light up in the display
to indicate that the oven is programmed
to start at a later time. The Cook Time
and Start Time Indicator Lights will flash.
NOTE: You can change a time setting
after pushing the Start/Enter pad by
repeating just Steps 4 and 5 or 6 and 7.
9. When the start time is reached, the
Delay Indicator Light will go off, a single
tone will sound and the display will count
down the baking/roasting
time in
minutes.
22
COOK START
TIME
TIME
CO-OK START
TIME
TIME
COOK START
TIME
TIME
Advertisement
Table of Contents
