Table of Contents
Advertisement
Personal Injury Hazard
Be sure
both support rods are fully
extended and in the locked position.
Failure to do so could result in personal
injury from the cooktop accidentally
falling.
Product Damage Hazard
Do not drop the cooktop.
Damage could result to the porcelain and
the cooktop frame.
3.
Wipe
with warm, soapy water.
Use
a soapy
steel-wool pad on heavily soiled areas.
4. To
lower the cooktop, lift
cooktop from both
sides while pressing the support rods back to
unlock them.
Lower
the cooktop into place.
Replace
reflector pans and surface burner
grates.
Surface
burners
To remove
burners:
1. Lift up
the cooktop, following instructions above.
2. Before cleaning, remove and throw away
screws that hold each of the burners in place.
The screws prevent the burners from moving
during shipment.
Remove
the shipping screws
with a Phillips screwdriver.
3. Grasp
burner head and
tilt
it to the right to
release the two tabs from slots in the burner
support.
4. Lift the end of the burner assembly, then
pull
away
from the front of the range to free the air
shutter from the gas valve orifice.
To clean
burners:
1. Wipe
off surface burners with warm, soapy
water and a sponge after each use. To
re-
move cookedon
food, soak
the burners in a
vinegar and water solution for 20-30 minutes.
Scrub
with a plastic scrubbing pad.
2. If ports are clogged, clean with a straight
pin. DO NOT enlarge or distort the ports.
DO NOT use a toothpick to clean the ports.
3. Before putting the burners back, dry
them thoroughly
by setting them in a
warm oven for 30 minutes.
Lighter
port
Air sh&ter
V
lorifice
31
Advertisement
Table of Contents
