Indicator Lights - Whirlpool SF375PEE Use & Care Manual

T
HE ELECTRONIC OVEN CONTROL
Indicator
lights
(see below)
Bake pad
(p. 14)
Custom broil
pad
(p. 18)
Display
•
When you first plug in the range, "PF" will appear
on the display until you press any command
pad. If "PF" again appears on the display, your
electricity was off for a while. You will need to
reprogram any temperature adjustments you may
have made. See "Adjusting the oven temperature
control" later in this section.
•
When you are using the oven, the display will
show preheat times and temperature settings.
•
When you are not cleaning or cooking with the
oven, the display will show the time of day.
•
When setting a function, if you do not press the
start/enter pad within 5 seconds, the Start?
indicator light will flash. If you do not press the
start/enter pad within 5 minutes, the function will
be canceled.

Indicator lights

An indicator light to the left of the display lights up
when you are in a setting. An indicator light on the
display lights up when the oven is on.
ON
TIMER
BAKE
BROIL
START ?
HEAT
CLEAN
DOOR LOCKED
CUSTOM AUTO
BAKE
BROIL CLEAN
TIME
Temperature/
Auto clean
pad time pads
(pp. 12, 14,
(p. 24)
17, 19, 24)
SELF CLEANING OVEN
CLOCK
START OFF
ENTER CANCEL
TIMER
• • CANCEL
5 SEC
Clock/timer pads
(pp. 12 and 13)
Using the control lock
The control lock lets you disable the control panel
command pads. The control lock comes in handy
when you want to prevent others from using
the oven.
NOTES:
•
You can only use the control lock when the oven
is not in use or the control has not been set.
•
Set the control lock when cleaning the control
panel to prevent yourself from accidentally turning
on the oven.
•
You must reset the control lock if the power goes
out for more than 1 second.
To lock the control panel:
Press and hold the start/enter pad for 5 seconds.
You will hear a single tone and "Loc" will
appear on the temperature display for
START
5 seconds. "Loc" and "START?" will
ENTER
then appear whenever a command pad
5 SEC
is pressed.
To unlock the control panel:
Press and hold the start/enter pad for 5 seconds.
You will hear a single tone and "Loc" and
"START?" will disappear from the tempera-
START
ture display.
ENTER
5 SEC
USING YOUR RANGE
Electronic
display
Start/enter pad
(p. 13)
Off/cancel pad
(p. 13)
11