Samsung 018 Series User & Installation Manual page 50

Setting indoor unit installation options
Setting an indoor unit installation option (suitable for the condition of each installation location)
1. Make sure power is ON to the outdoor unit.
2. The panel display should be connected to the indoor unit to receive option settings.
3. Set the installation option according to the installation requirements of the air conditioner.
f The default indoor unit installation option setting is "020000-100000-200000-300000". X
f Wireless remote controller address (SEG20) allows control of an indoor unit individually when there is more than X
one indoor unit in a space. This prevents unwanted overlapping of cotroller signal to different units.
f No need to assign SEG3, 6, 8, 9, 10, 11, 16, 21, 22, 23, 24 which are non applicable. Even if these segments are set, X
they will be ignored.
f If you set the applicable segments with numbers other than the indiciated, the initial setting will be maintained. X
4. Set the indoor unit option by wireless or wired remote controller.
Option No. : 02XXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1
Explanation PAGE
Indication Details Indication
Setting/
Details
0
Option SEG7
Explanation PAGE
Indication Details Indication
Setting/
Details
1
Option SEG13
Explanation PAGE
Indication Details Indication
Setting/
Details
2
50
SEG2
MODE
RESERVED
Details
2
SEG8
Use of drain pump*
Details
RESERVED
0 Disuse
1 Use
Use +
2 3minute
delay
SEG14 SEG15
Setting the output of
Use of external control
external control
Details Indication
0 Disuse 0
ON/OFF
1
Control
1
2 OFF Control
SEG3 SEG4
Use of external
temperature sensor
Indication Details
0 Disuse
1 Use
SEG9 SEG10
RESERVED
SEG16
S-Plasma ion
Details Indication Details
Thermo on 0 Disuse
Operation
1 Use
on
SEG5
RPM setting
Use of central control
compensation
Indication Details
0. Not used
0 Disuse 1. High ceiling mode
2. High ceiling kit
1 Use
SEG11 SEG12
RESERVED RESERVED
SEG17 SEG18
Number of hours
Buzzer control
using filter
Indication Details Indication Details
Use of
0 2
buzzer
Non use of
1 6
buzzer
SEG6
1000 Hour
2000 Hour