JVC KD-AVX11 Instructions Manual page 56

Symptoms
• Disc cannot be played back.
• Noise is generated.
• Tracks are not played back as you have
intended them to play.
• Elapsed playing time is not correct.
• Bluetooth device does not detect the unit.
• The unit does not detect the Bluetooth
device.
• The unit does not make pairing with the
Bluetooth device.
• Echo or noise occurs.
• Phone sound quality is poor.
• The sound is interrupted or skipped during
playback of a Bluetooth audio device.
• The connected audio device cannot be
controlled.
* For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.
Remedies/Causes
• Change the disc.
• Record the tracks using a compliant application in the
appropriate discs. (☞ page 4)
• Add appropriate extension codes to the file names.
The track played back is not a playable file format. Skip to
another file.
Playback order may differs from the one played back using
other players.
This sometimes occurs during playback. This is caused by
how the tracks are recorded.
This unit can be connected with one Bluetooth cellular
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect currently connected device
and search again.
• Check the Bluetooth setting of the device.
• Search from the Bluetooth device. After the device
detects the unit, select <Open> on the unit to connect
the device. (☞ page 24)
• Enter the same PIN code for both the unit and target
device. If the PIN code of the device is not indicated on its
instructions, try "0000" or "1234."
• Select the device name from <Special Device>, then
try to connect again. (☞ page 25, 47)
Adjust the position of the microphone unit.
Move the car to place where you can get a better signal
reception.
• Place the Bluetooth audio device nearer to the adapter.
• Disconnect the device connected for "Bluetooth phone."
• Turn off, then turn on the unit.
• (When the sound is not yet restored,) connect the device
again.
Check whether the connected audio device supports AVRCP
(Audio Video Remote Control Profile).
56