Download Print this page

Exposure Lights FUSE User Manual page 5

Advertisement

WARNING! IF THE NEXT STEPS ARE NOT PERFORMED CORRECTLY YOU MAY
DAMAGE YOUR BIKE, LIGHT; OR BOTH.
The lights will draw as much power as they require to run the LEDs at their brightest. This means
that if the light can draw more power than is available from the bike it may damage the bike motor.
Ensure to match the current setting of the light to the power output of the bike.
The light will automatically detect the voltage of the motor you're plugging it in to. To select the
correct power setting, hold the button down for 20 seconds (the light will emit a rapid set of
flashes) then follow the tables below:
6V
12V
When the light is off a single button press will indicate the active current limit by the button colour.
EXP U G22
EXP U G22
CURRENT
HOLD BUTTON FOR 20 SEC,
1.5A
HOLD BUTTON FOR 20 SEC,
2A
RELEASE, PRESS BUTTON
HOLD BUTTON FOR 20 SEC,
2.5A
RELEASE, PRESS BUTTON
CURRENT
HOLD BUTTON FOR 20 SEC,
1A
HOLD BUTTON FOR 20 SEC,
1.5A
RELEASE, PRESS BUTTON
HOLD BUTTON FOR 20 SEC,
2A
RELEASE, PRESS BUTTON
#ownthenight
For more information please visit:
For more information please visit:
exposurelights.com
exposurelights.com
BUTTON INPUT
RELEASE BUTTON
ONCE
TWICE
BUTTON INPUT
RELEASE BUTTON
ONCE
TWICE
BUTTON FEEDBACK
GREEN
AMBER
RED
BUTTON FEEDBACK
GREEN FLASH
AMBER FLASH
RED FLASH

Advertisement

loading

This manual is also suitable for:

Expug22