Table Of Contents; Using Your Range - Whirlpool RF366PXY Use And Care Manual

Using Your Range
In This Section
Paw
Using the surface unitm ..................................... .7
Positioning rack
and pans .............................. .9
For beat air circulation .....................................
10
Using aluminum
foil for baking ...................... .10
Betting the clock ...............................................
11
Using the Minute Timer .................................... 11
Bakhghoasting ................................................
12
Adjusting the oven temperature control
....... .12
Paw
Broiling ..............................................................
13
Broiling tipa ....................................................... 14
Energy saving tipa ............................................
14
Using the automatic MEALTIMER" clock ....... 15
The oven vent ...................................................
16
The
l
toraga drawer
.......................................... 17
The anti-tip bracket ..........................................
17
Optional
door panel pat ................................. .17
To obtain the best cooking results possible, you must operate your range properly. This section gives
you important information for efficient and safe use of your range.
Using the surface units
Control knobs must be pushed in before
turning them to a setting. They can be set
anywhere between HI and OFF.
Surface unit markers
The solid dot in the surface unit marker shows
which surface unit is turned on by that knob.
Surface heating indicator light
The SURFACE HEATING Indicator Light on the
control panel will glow when a surface unit is
turned on.
Hot surface indicator lights
The Hot Surface Indicator Lights on the cooktop
surface will glow when the surface units get hot.
The Indicator Lights will continue to glow as long
as the surface units are too hot to touch, even
after they are turned off.
Burn and
Fire Hazard
Be sure all control knobs are turned to OFF
and all indicator lights are OFF when you ars
not cooking.
Someone could be burned or a fire could sta
if a surface unit is accidentally left ON.
NOTE: The surface elements may smoke slightly
and emit a burning odor during the first few hours
of use. This is normal. It is caused by the
insulation material of the new ceramic cook-top
elements and will not occur again.