Battery Charging And Alerts; Vibration Alert Settings; Out Of Range - LG Tone Flex HBS-XL7 User Manual

Battery Charging and Alerts

Open the Charging Port cover and connect the charger to the Charging Port.
Press and hold the Volume Button (Previous
Indicator Lamp and battery level by voice.

Vibration Alert Settings

Out of Range

If the device connected to the product is out of effective communication range, the communication
signal becomes weak and the communication is lost. The effective communication range may vary
depending on surrounding and other conditions.
If the device comes back within effective communication range, the product automatically reconnects
to the device. If the device is not automatically reconnected, press the MFB on the product to connect
to it manually.
12
Indicator Lamp Red
Battery Status Charging
The headset is turned off while being charged.
NOTE: If the temperature is too high or too low, the status indicator
lamp blinks in red and the battery is not charged.
For more information on the battery, go to [Additional
Information] > [4. Battery information].
) for one second in idle mode to check the
Battery Status Sufficient
Indicator Lamp Blue flashes
The vibration alert is automatically set to the ON position when you
turn on the power.
To enable or disable Vibration Alert, press and hold the Volume Button
(Next ) for two seconds.
NOTE: If you turn off the vibration alerts, it will not vibrate even when
a call is being received or you are out of communication range.
Purple Blue
80% Completed
Normal Insufficient
Purple flashes Red flashes