Adjusting The Oven Temperature Control - Whirlpool FES310B Use And Care Manual

Adjusting the oven temperature control
Although your new oven is properly adjusted to
provide accurate temperatures, it may cook
faster or slower than your old oven.
If, after using the oven for a perii of time,
you are not satisfied with the baking/roasting
results, you can change the temperature
calibration by following these steps:
1.
Make sure
the Oven Temperature Con-
trol Knob is turned to the
off
position.
Pull
knob straight off and flip it over.
2.
Loosen
the locking screws inside the
control
knob. Note the position of the
notches.
3. To lower the temperature, hold
knob
handle firmly and
move
the tooth a notch
counterclockwise.
Each notch equals
about 10°F (5°C).
4. To raise the temperature, hold
knob
handle firmly and move the tooth a notch
clockwise.
Each notch equals about
10°F (5%).
5. Tighten
the locking screws and
replace
the control knob.
Notches Tooth
Locking screws
13