Washing Pump - Toshiba DWS-22A Series Service Manual

Part name
Funtion
Steps of Disassemble
1.Disconnect the power, and then remove bottom cover.
2. Disconnect 2 wiring harnesses (mark 1).
3. Rotate pump after pushing the snap joint (mark 2).
4. Washing Pump Assembly is removed.
Technical Data
Nominal voltage
Frequency
Resistance
The defeat point
1. The motor coil is broken, so the wash pump can't work. It will cause E3 error.
2. The connector is loose, the wash pump can't work. It will cause E3 error.
3. The rotor is locked by residues, so the wash pump can't work . It will cause the E3 error.
4. The drain pump assembly bracket is loose, it will cause noise.
6. If the machine hasn't been used for long time, there is a possibility the wash pump
can't starting.

Washing Pump

The softener is designed to remove minerals and salts from the water, which would
have a detrimental or adverse effect on the operation of the appliance.
2
1
AC 220-240V
50Hz
33.3Ω
29