Safety instructions for maintenance and repair
Maintenance and repair may only be carried out by qualified specialised personnel.
Prior to beginning maintenance or repair work, switch off the instrument:
Switching off the
There is a crush hazard when opening or closing the holding clamps on the flap
of the spark stand!
Switch off the excitation source at the rotary knob.
Exit the SpArcfire software and shut down the operating system.
Switch off the instrument at the on/off switch on the rear.
Secure the instrument against restart and attach a warning "Caution –
If necessary, use a tool to open the holding clamps.
Close the holding clamps from above.
Hitachi High-Tech Analytical Science