Be sure to unplug the power.
Clean the outside of the fridge-freezer with a soft
cloth soaked with hot water or liquid detergent.
If you use a detergent, be sure to wipe it with a
clean wet cloth.
Same as above.
Check that the power cord is not damaged, power
plug has not overheated, and that the power plug
is tightly inserted into the outlet.
Be sure to dry the appliance with a cloth after
washing it with water.
Do not use abrasive, petroleum, benzene,
thinner, hydrochloride acid, boiling water, rough
brush, etc, as they may damage parts of the
Wipe moisture out around the door part and the
drip tray using a clean cloth.
Wipe moisture out of dispenser and on the
dispenser pad using a cloth.
Care and Maintenance
Turn the knob shutter to open.
And pull out the water tank assembly.
After unlocking the clamp and remove it, clean
and fully rinse the inside/outside part of the
water tank by using neutral cleansing agent.
Cap assembly tank & Cap tank
Clean and fully rinse the cap assembly tank & cap
tank by using neutral cleansing agent.
Especially for the groove part of the cap tank, it is
convenient to cleanse it by using a small brush.
Don't separate the screw and tube from the cap
assembly tank. Please clean the out surface.
In case of a power outage, you should remove
ice from the freezer to avoid flooding the room
DISPOSAL OF YOUR OLD APPLIANCE
1. When this crossed-out wheeled bin symbol is
attached to a product it means the product is
covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be
disposed of separately from the municipal waste
stream via designated collection facilities appointed
by the government or the local authorities.
3. The correct disposal of your old appliance will help
prevent potential negative consequences for the
environment and human health.
4. For more detailed information about disposal of
your old appliance, please contact your city office,
waste disposal service or the shop where you
purchased the product.