Descaling Mode - Silvercrest SEMM 1470 A1 Operating Instructions Manual

Descaling mode

After 500 uses, the appliance indicates that it needs to be descaled.
The control lamp for the "Large" latte button
"Small" latte button
up.
CAUTION – PROPERTY DAMAGE
■ You can continue to use the appliance, but we recommend descaling since
neglecting to do so could damage the appliance and eventually it will
become unusable.
NOTE
► You can also carry out the descaling programme before 500 uses. To do
so, please proceed as described below.
1) Switch the appliance off using the on/off switch
mains plug from the wall socket.
2) Fill the water tank
3) Place the empty milk tank
4) Turn the "Milk quantity" knob
5) Place the sieve holder
).
6) Place a suitably large, empty container on the drip grille
7) Adjust the milk nozzle
8) Insert the plug into a mains power socket and switch on the appliance using
the On/Off switch
NOTE
► If the device has already run through 500 applications, the control lamp
for the "Large" latte button
button
indicating that the appliance should be descaled.
9) Press the "Large" latte button
the same time, as soon as the appliance is heated up. The appliance starts
the descaling process. All of the control lamps light up in sequence. Steam
and hot water come out of the milk nozzle
The descaling process completes after around 10 minutes, and all of the
control lamps come on permanently.
10) Empty the rest of the water/vinegar mix out of the water tank
the water tank
SEMM 1470 A1
flash alternately as soon as the appliance has heated
with 400 ml of vinegar and 600 ml of water.
in the appliance.
to the "Clean"
in the appliance with the espresso sieve (
so that it is pointing into the container.
. The appliance heats up.
and the control lamp of the "Small" latte
flash alternately as soon as the appliance is heated up,
(see section "Cleaning the water tank").
and the control lamp for the
and disconnect the
position.
and the "Small" latter button
.
GB │ IE
or
.
at
and clean
│
57 ■