Important Safety Instructions; Table Of Contents; Parts Needed - Bosch WALL OVENS Installation Instructions Manual

Bosch wall ovens installation instructions
Hide thumbs Also See for BOSCH WALL OVENS:
Table of Contents

Advertisement

Available languages

Available languages

Important Safety Instructions

Important Safety Instructions ............................................................................................... 1
Preparation .......................................................................................................................... 2
Installation .......................................................................................................................... 4
Final Steps ........................................................................................................................... 5
Please read all instructions before using this appliance.
If the information in this manual is not followed exactly, a fire or explosion may result

PARTS NEEDED:

Tape Measure
Straight Edge or Ruler
Phillips Head Screwdriver
Level
Pencil
Wire Cutters or Wire Stripper
Wire Nuts
Volt Meter (0-250 VAC)
1" Hole Saw
Hand or Saber Saw
Drill and Drill Bit
Safety Gloves and Goggles
Cloth or cardboard (Optional - to Protect Floor)
WARNING
Before installing, turn power OFF at the service
panel. Lock service panel to prevent power from
being turned ON accidentally.
CAUTION
Do not use the oven for storage.
Unit is heavy and requires at least two people or
proper equipment to move.
Important:
Save these instructions for the local inspector's use.
Installer:
Please leave the instructions with the unit for the
owner
Owner:
Please save these instructions for future reference.

Table of Contents

WARNING
causing property damage, personal injury or death.
Remove all tape and packaging before using
the oven. Destroy the packaging after unpacking
the oven. Never allow children to play with
packaging material.
Be sure your appliance is properly installed
and grounded by a qualified technician in
accordance with the National Electrical Code ANSI/
NFPA No. 7 latest edition (or the Canadian Electric
Code) and local electrical code requirements.
Important: Local codes vary. Installation, electrical
connections and grounding must comply with all
applicable codes.
Install only per installation instructions
provided in the literature package for this
oven.
Ask your dealer to recommend a qualified
technician and an authorized repair service.
Know how to disconnect the power to the
oven at the circuit breaker or fuse box in case of
an emergency.
Do not repair or replace any part of the
appliance unless specifically recommended
in the manuals. All other servicing should be
done by a qualified technician. This may reduce
the risk of personal injury and damage to the
oven.
Never modify or alter the construction of an
oven by removing panels, wire covers, screws, or
any other part of the product.
DO NOT LIFT OVEN BY DOOR HANDLE.
Remove the door for easier handling and installa-
tion. See 'Removing the Oven Door' in the Mainte-
nance section of the Use and Care Manual.
English • 1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents