Dell Latitude C/Port II APR System Information Manual page 14

12 D e l l L a t i t u d e C / Po r t I I A P R S y s t e m I n f o r ma t i o n G u i d e
D o c k i n g t h e C o m p u t e r
docking connector
a Horizontally center the computer on the APR platform, with the
back of the computer facing the docking device docking
connector, as shown in "Docking the Computer."
Slide the computer toward the connector until you feel the
b
grooves on the bottom of the computer engage with the alignment
rails.
NOTICE: If you attempt to push the computer all the way into the APR
without engaging the alignment rails, you may irreparably damage the docking
connector on the computer.
NOTICE: Do not pick up the computer or the docking device separately when
they are connected because you may damage the connectors on the computer
and the docking device.
NOTICE: If you are using a monitor with the monitor stand
monitor from the stand before moving the docking control base into place.
Gently push the computer forward until the docking connector is
c
fully engaged.
alignment rails (2)
,
remove the