Husqvarna AUTOMOWER 105 Operator's Manual page 19

mowing until the operation selection is
AUTO .
altered to
AUTO . The standard, automatic operation
•
mode where the product mows and
charges automatically.
MAN . When mowing secondary areas the
•
MAN setting must be used. If MAN is
selected and the product is started when
it is out on the lawn, it mows until the
battery runs out. It then stops and
the 'Needs manual charging' message
appears. The product must then be
moved manually to the charging station
and then started manually after charging.
If the product charges in the
it will fully charge, move about 20 cm / 8
in. out of the charging station and then
stop. This indicates that it is charged and
ready to start mowing.
4.3 Operating mode, START
®
Automower 305/310/315/315X/
420/430X/440/450X
Push the START button to select one of the
following operating modes:
Main area: The standard operating mode
•
where the product mows and charges
automatically.
Secondary area: When mowing
•
secondary areas this setting must be
chosen.
Secondary area mode, the operator
In the
must move the product manually between the
main area and the secondary area. The
product mows until the battery is empty. When
the battery is charged, the product moves out
of the charging station and stops. The product
is now prepared to start operation, but needs
confirmation from the operator first.
1418 - 001 - 04.12.2019
Note:
the battery is charged, set the product to
area mode before placing it in the charging
station.
Override Schedule: Any Schedule
•
settings made can be temporarily
overridden by selecting
schedule . It is possible to override the
Schedule for 24 h or 3 days.
Spot Cutting: (Not available for
•
Automower
spiral pattern to cut the grass where it has
MAN mode, been mown less than in other parts of the
lawn.
The
the START button. You can select how
the product should continue to work once
mowing is finished by pushing the right
arrow button and then specifying
Area or Secondary Area .
4.4 Operating mode, PARK
Automower
420/430X/440/450X
Push the PARK button to select one of the
following operating modes:
Park until further notice: The product
•
stays in the charging station until another
operating mode is selected by pushing
the START button.
Start again in 3 hours: The product stays
•
in the charging station for three hours and
then automatically returns to normal
operation. This operation mode is suitable
when there is a need to pause operation,
e.g. for temporary irrigation or for games
on the lawn.
If you want to cut the main area after
Override
®
310). The product works in a
Spot Cutting function is activated with
®
305/310/315/315X/
Main
Main
Operation - 19