Brookstone Mach IX Installation Manual
Hide thumbs
Also See for Mach IX:
- User manual (96 pages) ,
- Installation manual (8 pages) ,
- User manual (47 pages)
Subscribe to Our Youtube Channel
Related Manuals for Brookstone Mach IX
Summary of Contents for Brookstone Mach IX
- Page 1 Installation Manual The BROOKSTONE® trademarks, names and logos are owned by BKST Brand Holdings LLC. ©2019. All rights reserved. Manufactured, marketed and distributed by (Cozzia USA LLC) under license.
- Page 2 MACH IX Assembly Instructions MACH IX arrives in 2 boxes. Brookstone BK-750/MACH IX. Brookstone Open box 1 and remove all contents. Remove the packing materials. Take the chair out of the box. Collect all the accessories and put them aside.
- Page 3 Locate the link rod Connect wires in footrest. Connect footrest wire connector and screw the caps tight. then connect the air hose. Open box 2. Take out footrest and remove the cotter pin and bolt and put aside the chair base. Caution: After the wire connector have been connected the cap must be screwed tight.
- Page 4 Place the remote control into the holder. Remote control inside the white box Zip the zippers between seat pad and base, zip the zipper between seat pad and footrest cushion. Turn on the chair. Connect the chair to a power supply and turn on the power switch. The chair will now be ready to start.
Need help?
Do you have a question about the Mach IX and is the answer not in the manual?
Questions and answers