Related Manuals for BAB TECHNOLOGIE EIBPORT V3
Summary of Contents for BAB TECHNOLOGIE EIBPORT V3
- Page 1 Update Tool V3 EIBPORT Version 3 Update Procedure Documentation BAB TECHNOLOGIE GmbH Update Tool V3 Documentation...
- Page 2 Update Tool V3 EIBPORT Version 3 Update Procedure Documentation BAB TECHNOLOGIE GmbH Hörder Burgstr. 18 D-44263 Dortmund info@bab-tec.de Tel.: +49 (0) 231 – 476 425 - 30 Fax.: +49 (0) 231 – 476 425 - 59 www.bab-tec.de...
- Page 3 Update Tool V3 EIBPORT Version 3 Update Procedure Documentation EIBPORT VERSION 3 UPDATE PROCEDURE You will find a description of the update procedure additionally in the top part of the update tool. The LED codes are also mentioned there. UPDATE PREPARATIONS The EIBPORT must be in the same subnet as the pc from which the update will be done.
- Page 4 Update Tool V3 EIBPORT Version 3 Update Procedure Documentation Figure 2: Update is successfully loaded While this dialogue is displayed the Update Tool proceeds with its work in the background. That means that even if this window is not acknowledged by hitting “OK” button, the update progress still remains. Depending on the firmware loaded the update lasts about 5 to 8 minutes.
- Page 5 Update Tool V3 LED Codes Documentation LED CODES During the Update procedure the LEDs are indicating in which status the update procedure is been currently. EIBPORT IN NORMAL OPERATION / FIRMWARE IS BEEN LOADED LED 1: GREEN LED 2: GREEN LED 3: GREEN / flashing ORANGE depending on Bus traffic LED 4: OFF LED 5: GREEN...
Need help?
Do you have a question about the EIBPORT V3 and is the answer not in the manual?
Questions and answers