Establishing The Number Of Coffees Dispensed, The Number Of Jugs Dispensed And The Number Of Descalings (Statistics); Resetting The Machine To The Factory Setting (Reset To Default) - Electrolux CG 6400 Operating Instructions Manual

If "OK" is not pressed, after about
120 sec. the appliance returns auto-
matically to the coffee mode without
storing the setting.
After programming, the display returns
3
automatically to the menu item for
setting the fill level, e.g. «ESPRESSO
CUP».
0 To return to the coffee mode, press the
"Menu" key (Fig. 4) twice or wait about
120 sec for the machine to return
automatically to the coffee mode.
Saving the fill level is only possible for
3
1 cup. Where 2 cups are to be dis-
pensed, the stored values are doubled.
13.6 Establishing the number of cof-
fees dispensed, the number of
jugs dispensed and the number
of descalings (statistics)
The coffee machine has the facility to
display
– the total number of cups of coffee
made,
– the number of jugs prepared, con-
taining 4 cups, 6 cups, 8 cups and
10 cups, as well as
– the number of descalings carried
out.
Where 2 cups of coffee are dispensed
3
simultaneously, there are also counted
as 2 cups of coffee.
0 Press the "Menu" key (Fig. 4).
The menu item «CHOOSE LAN-
GUAGE» appears.
0 Press the scrolling keys "<" or ">" (Fig.
5) until the menu item
«STATISTICS» appears.
0 Confirm the menu item with the "OK"
key (Fig. 5). The display shows the
number of cups dispensed up to this
time, e.g. «TOT. COFFEES 135» for
135 dispensed coffees.
0 Repeatedly press the scrolling keys "<"
or ">" (Fig. 5) to indicate the number
of jugs dispensed for each of the sizes
possible in the jug function (4 cups, 6
cups, 8 cups, 10 cups). The display
shows the number of jugs dispensed in
the respective cup size, e.g. «JUG 4
CUPS 12» where 12 jugs, each con-
taining 4 cups, have been prepared.
0 Repeatedly press the scrolling key ">"
(Fig. 5) to indicate the number of des-
calings carried out, e.g. «TOT. DES-
CALES 5» for 5 descalings.
0 To return to the coffee mode, press the
"Menu" key (Fig. 4) twice or wait about
120 sec for the machine to return
automatically to the coffee mode.
13.7 Resetting the machine to the
factory setting (reset to default)
This function is used to reset changes
you have made to the factory settings.
The following settings or saved values
are affected:
• water hardness
• cup fill levels
• coffee temperature
• shut-off time
0 Press the "Menu" key (Fig. 4).
The menu item «CHOOSE LAN-
GUAGE» appears.
0 Press the scrolling key "<" or ">" (Fig.
5) until the menu item «RESET TO
DEFAULT» appears.
0 Confirm the menu item with the "OK"
key (Fig. 5). The display shows «RESET
TO DEFAULT NO».
0 Press the scrolling key "<" (Fig. 5) until
the display shows «RESET TO
DEFAULT YES»
0 Confirm the menu item with the "OK"
key (Fig. 5). The machine is now reset
to the factory settings.
If "OK" is not pressed, after about
120 sec. the appliance returns auto-
matically to the coffee mode and the
machine is not reset to the factory set-
tings.
After programming, the machine
3
returns automatically to the coffee
mode.
g
49