Advertisement
PREPARATION
Safety precautions
This installation manual explains how to install a FCU interface module that is connected
to a Samsung FCU KIT. Please read this manual thoroughly before installing the product.
(Please refer to appropriate installation for any optional product installation.)
WARNING
Hazards or unsafe practices that may result in severe personal injury or death.
CAUTION
Hazards or unsafe practices that may result in minor personal injury or property damage.
Follow directions.
Do NOT attempt.
Make sure the machine is grounded to prevent electric shock.
Unplug the power plug from the wall socket.
Do NOT disassemble.
For installation
WARNING
Consult qualified installer or service center for installation.
y If not, there is risk of product malfunction, water leakage, electric shock or fire.
Make sure to use the supplied cables.
y If not, there is risk of fire or damage to the product.
Make sure that all wiring work is done by qualified person complying regional
standards and instructions in this manual.
y If the installation is done by unqualified person, there is risk of product malfunction,
electric shock or fire caused by incorrect installation.
Check if the installation was done properly according to the installation manual.
y There is risk of electric shock or fire if the product is installed incorrectly.
CAUTION
Make sure there is no tension to the cable during installation.
y Cable may get cut and cause fire.
When installing the product in hospitals or other places, make sure that the product
does not interrupt with other products.
y Abnormal operation may occur.
2
@FCU AIM-F10N_IM_06087A-00_EN_160307.indd 2
2016-03-15 오후 5:11:53
Advertisement
