Safety Notes; Description - Siemens SIMATIC NET ANT795-6MT Compact Operating Instructions

Table of contents
1 Safety notes ............................................................................................... 31
2 Description ................................................................................................. 31
3 Mounting .................................................................................................... 33
4 Connection ................................................................................................ 38
5 Technical data ............................................................................................ 39
6 Dimension drawings ................................................................................... 52
7 Texte ........................................................... Fehler! Textmarke nicht definiert.
1

Safety notes

WARNING
Antennas installed outdoors must be within the area covered by a lightning
protection system. Make sure that all conducting systems entering from outdoors
can be protected by a lightning protection potential equalization system. When
implementing your lightning protection concept, make sure you adhere to the VDE
0182 or IEC 62305 standard.
WARNING
The device (and its components) may only be used for the application described in
the catalog or the operating instructions. It may only be combined with devices or
components of other manufacturers that have been approved and released by
Siemens.
These instructions are intended for industrial applications.
Correct and safe operation of the device is guaranteed only when it is transported,
stored, set up, installed, used and maintained according to the recommendations.
2

Description

Introduction
The ANT793-6MT antenna is a MIMO antenna with three QMA connectors.
Antenna ANT795-6MT
A5E03484068-02, 01/2017
31