Machine Inspection; Safety Decals - Patriot equipment Corn Reel Installation & Operation Manual

MACHINE INSPECTION

After delivery of your new Corn Reel and/or completion of assembly, before each use, inspection of the machine is
mandatory. This inspection should include, but not be limited to:
1. Check to see that all guards are in place, secured and functional.
2. Are all fasteners tight?
3. Check oil levels in the Engine, clutch gearbox and the auger gearbox. (See Owners Manuals.)
4. Is the chain the correct tension?
5. Are the paddles orientated correctly?

SAFETY DECALS

1. Keep safety decals clear and legible at all times.
2. Replace decals and signs that are missing or have become unreadable.
3. Safety signs are available from your Dealer or the Manufacturer.
How to install Safety Decals
1. Be sure that the installation area is clean and dry.
2. Decide on the exact position before you remove the backing paper.
3. Align the decal over the specified area and carefully press the small portion with the exposed sticky backing in
place.
4. Slowly peel back the remaining paper and carefully smooth the remaining portion of the decal in place.
5. Small air pockets can be pierced with a pin and smoothed out using a piece of decal backing paper.
Corn Reel V2.0 6