Samsung DW80M3021 Series User Manual page 9

Delay Start
6
START
7
You can select options (Hi-Temp Wash, Sanitize) before starting a cycle. If you change the cycle after
selecting an option, the original cycle is reset.
To prevent the touchpad from losing response sensitivity, follow these instructions:
- Touch the center of each keypad using one fi nger. Do not push.
- Clean the touch control's surface regularly with a soft, damp cloth.
- Be careful not to touch more than one touch key pad at a time, except as directed.
When you pause a cycle by opening the door during operation, press the START button before closing
the door to continue the cycle.
Push door fi rmly closed within 3 seconds of pressing START button.
If the door is not closed within 3 seconds, the cycle will not start.
DW80M3021_DD81-02549A-00_EN.indd 9 DW80M3021_DD81-02549A-00_EN.indd 9
Delay a cycle for up to 24 hours in one-hour increments. To increase the delay
start time, press or hold the Delay Start button. The hour displayed indicates
the time at which the wash will start.
- After setting the delay time, press the START button, and then close the
door to start the cycle.
- If you want to change the delay time once the dishwasher has started,
press the Cancel button and turn off the dishwasher. Then, turn on the
dishwasher again and select a new cycle with a new delay setting.
To start a cycle, press the START button before closing the door.
*Cancel: To cancel a currently running cycle and drain the dishwasher, press
and hold the START button for three (3) seconds.
Once the dishwasher is reset, select a cycle and option, and then press
START to restart the dishwasher.
O O X
English - 9
2017-08-02 2017-08-02 2:42:43 2:42:43