Connecting To A Virtual Private Network (Vpn) - Philips Xenium CTW632GRY/00 Manual

Turn on Wi-Fi and connect to a WLAN
From the Home screen, tap 1 >Settings
1
>Wireless & networks> Wi-Fi.
2
Select the Wi-Fi check box to turn Wi-Fi on.
3
Tap Wi-Fi settings, detected Wi-Fi networks
will be listed in the Wi-Fi networks section.
Tips:
•
If the wireless network that you want is not listed, tap Add
Wi-Fi network to manually add it.
4
Choose the Wi-Fi network you want to connect
to, tap Connect.
5
If you selected a secured network, you'll be
asked to enter the network key or password.
6
Using Wi-Fi Protected Setup (WPS), you can
connect to a secured network.
7
Using the WLAN Direct feature to connect
two devices via a WLAN without requiring an
access point.
Connecting to a virtual private
network (VPN)
You can connect and access resources inside a
secured local network, such as your corporate
network.
24 Internet connections
Depending on the type of VPN you're using at
work, you may be asked to enter your login
credentials and install security certificates before
you can connect to yourcompany's local network.
You can get this information from your network
administrator.
You must first establish a Wi-Fi or data connection
before you can start a VPN connection.
Set up secure credential storage
If your network administrator tells you to download
and install security certificates,you must first set up
secure credential storage on the phone.
From the Home screen, tap 1 >Settings
1
>Security>Set password.
2
Enter a new password and confirm.
3
Select the Use secure credentials check box
then you can download and install the
certificates needed to access your local
network.
Connect to a VPN
1
Add a VPN connection: Tap Settings >
Wireless & networks>VPN settings > Add