Disclaimer - Emerson Copeland Discus Series Application Manuallines

DK
K
1/8" - 27 NPTF
Magnetic
2)
plug
5/16"-18 UNC
Cylinder head
29 - 34 Nm
SW 12.7
5/16"-18 UNC
Bottom plate
30 - 36 Nm
SW 12.7
5/16"-18 UNC
Mounting foot
30 - 36 Nm
SW 12.7
5/16"-18 UNC
Stator cover
30 - 36 Nm
SW 12.7
5/16"-18 UNC
Housing cover
29 - 30 Nm
SW 12.7
Mounting plate
- - -
for terminals
Terminal stud
Terminal stud
thermistors
Bolt for the
connecting
- - -
3)
rod
2)
On LH compressors: 3/8" - 18 NPTF / 22-25 Nm / SW 12.7.
3)
In case of replacement of the piston con-rod assemblies, clean the Torx screws and apply
Loctite 2701.
The ranges of torque values given in this specification are assembly
torque. Torque after joint relaxation must be within 15% of the minimum
assembly torque unless re-torque is called for and must not be above
10% of the maximum assembly torque.

Disclaimer

1. The contents of this publication are presented for informational purposes only and are not to
be construed as warranties or guarantees, express or implied, regarding the products or
services described herein or their use or applicability.
2. Emerson Climate Technologies GmbH and/or its affiliates (collectively "Emerson"), as
applicable, reserve the right to modify the design or specifications of such products at any
time without notice.
3. Emerson does not assume responsibility for the selection, use or maintenance of any
product. Responsibility for proper selection, use and maintenance of any Emerson product
remains solely with the purchaser or end user.
4. Emerson does not assume responsibility for possible typographic errors contained in this
publication.
D6.3.4/0715-0716/E
DL, DLH
D2S
L, LH
19 - 30 Nm
SW 12.7
3/8"-16 UNC
57 - 68 Nm
SW 14.2
3/8"-16 UNC
57 - 68 Nm
SW 14.2
3/8"-16 UNC
57 - 68 Nm
SW 14.2
3/8"-16 UNC
57-68 Nm
SW 14.2
3/8"-16 UNC
57 - 68 Nm
SW 14.2
- - - - - -
1/4"-20 UNC
5-6.5 Nm
SW 10
10 - 32 UNF
3.4 - 4 Nm
SW 9
- - -
D2D D3S, D3D
2D 3D
1/8" - 27 NPTF
26 - 32 Nm
SW 12.7
3/8"-16 UNC
57-68 Nm
SW 14.2
3/8"-16 UNC
57-68 Nm
SW 14.2
3/8"-16 UNC
57-68 Nm
SW 14.2
3/8"-16 UNC
57-68 Nm
SW 14.2
3/8"-16 UNC
57 - 68 Nm
SW 14.2
5/16"-18 UNC
32 - 40 Nm
SW 12.7
1/4"-28 UNF
5-6.5 Nm
SW 10
10 - 32 UNF
3.4 - 4 Nm
SW 9
1/4"-28 UNF
15 - 18 Nm
"Torx"-screw
D6S, D6D D8S, D8D
D4S, D4D
D6T, 6T
1"-16 UNC
87 - 149 Nm
SW 25.4
3/8"-16 UNC
57 - 68 Nm
SW 14.2
3/8"-16 UNC
57 - 68 Nm
SW 14.2
3/8"-16 UNC
57 - 68 Nm
SW 14.2
1/2"-13 UNC
68-79 Nm
SW 18
3/8"-16 UNC
57 - 68 Nm
SW 14.2
3/8"-16 UNC
57 - 68 Nm
SW 14.2
1/4"-28 UNF
5-6.5 Nm
SW 10
10 - 32 UNF
3.4 - 4 Nm
SW 9
1/4"-28 UNF
15 - 18 Nm
"Torx"-screw
8D
39