English
Cleaning and maintenance
Cleaning the appliance
3 To trim most effectively, move the appliance
against the hair growth direction. Make sure that
the surface of the comb always stays in contact
with the skin.
Note: Only the cutting element and the comb can
be cleaned with water.
We advise you to empty the hair-collection
chamber after each trimming session. When you
trim long, dense beards, it may also be necessary
to empty the hair-collection chamber during the
trimming session in order to maintain optimal
suction performance.
1 Switch off the appliance and disconnect it from
the power outlet.
2 Wipe the housing of the appliance with a dry
cloth.
3 Remove the comb.
4 Clean the comb with the cleaning brush and/or
rinse it under the tap.
25