Special VCR Features
Tape Position Display Feature
Weak Signal Display ON/OFF Feature
To find out the present tape position.
When set to “ON,” picture is displayed
Tape position is displayed for VHS-C
regardless of signal strength.
Cassettes type, tapes under 30 minutes, and
some other tapes, but the position is not
1
Press ACTION to display menu.
correct.
VCR
CLOCK
CHANNEL
REPEAT PLAY
:OFF
1
REMOTE WARNING
:ON
Press TAPE POSITION
AUTO SHUT- OFF
:OFF
IDIOMA/LANGUE : ENGLISH
to detect tape position.
VCR’ S OUTPUT CH
:3
SELECT :
• “DETECTING TAPE
EXIT
: ACT I ON
DETECTING TAPE POSITION
POSITION” only
appears the first time
2
Press
to select
VCR
CLOCK
CHANNEL
a cassette is inserted
ANTENNA : CABLE
and display CHANNEL.
AUTO SET
and it takes several
WEAK SIGNAL DISPLAY : OFF
Press
to select
seconds for correct
WEAK SIGNAL
indication to appear.
DISPLAY, and press
SELECT :
SET :
EXIT
: ACT I ON
to set ON or OFF.
• The present tape
position indication is
• ON: Picture is displayed despite signal
BEG I N
END
displayed.
condition an may have poor quality.
OFF: Screen turns solid blue when signal
2
Press TAPE POSITION
is weak or non-existent.
to return to normal screen.
• Selecting ON has no effect on connected
equipment with blue back feature.
3
Remote Warning ON/OFF Feature
Press ACTION to return to normal screen.
If Multi-brand feature is used (page 2), and this
feature is set to on, a warning appears
whenever an invalid key is pressed in TV mode.
VCR Lock Feature
1
Press ACTION to display menu.
When set to ON, all operations except for timer
record and tape eject are prohibited. Useful for
2
Press
to select
VCR
CLOCK
CHANNEL
households with small children.
REPEAT PLAY
:OFF
REMOTE WARNING
REMOTE WARNING
:ON
AUTO SHUT- OFF
:OFF
IDIOMA/LANGUE : ENGLISH
and press
to set ON
VCR’ S OUTPUT CH
:3
To turn on, hold down
or OFF.
REC on the VCR in Stop
SELECT :
SET :
VCR LOCK ACT I VATED
• If “OFF,” remote
mode with no tape
EXIT
: ACT I ON
inserted for 7 sec.
warning will not appear
(Please ignore the NO
if invalid key is pressed.
CASSETTE warning.)
3
Press ACTION to return to normal screen.
To turn off, repeat above.
VCR LOCK OFF
Auto Shut-Off Feature
The power shuts off at a preset time.
• VCR Lock cancels in 24 hours if clock is set.
1
Press ACTION to display menu.
2
Press
to select
VCR
CLOCK
CHANNEL
REPEAT PLAY
:OFF
AUTO SHUT-OFF.
REMOTE WARNING
:ON
AUTO SHUT- OFF
:OFF
IDIOMA/LANGUE : ENGLISH
Press
repeatedly to
VCR’ S OUTPUT CH
:3
change shutoff time as
SELECT :
SET :
shown below.
EXIT
: ACT I ON
REC
OFF
2 Hours
4 Hours
6 Hours
3
Press ACTION to return to normal screen.
• The shut-off countdown will not
Note
function during Play or Record.
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.