Optional Equipment Connections; Vcr Connection - Panasonic CT-20SX11 Operating Instructions Manual

Optional Equipment Connections

IMPORTANT
COMPUTERS, DSS OR OTHER FIXED IMAGE DISPLAYS.
The extended use of fixed image program material can cause a permanent "shadow image" on
the picture tube. This background image is viewable on normal programs in the form of a
stationary fixed image. This type of irreversible picture tube deterioration can be limited by
observing the following steps:
A. Reduce the brightness/contrast setting to a minimum viewing level.
B. Do not display the fixed image for extended periods of time.
C. Turn the power off when not in actual use.

VCR Connection

VCRs, video disc players, video game equipment, and DSS equipment can also be
connected to the video inputs. See the optional equipment manual for more
information.
CONNECTIONS ON BACK OF TV
ANT
S-VIDEO
Use either the
S-VIDEO or Video
connection.
CABLES NOT SUPPLIED
Procedure
INFORMATION
Note: The marking or retained image on the picture tube resulting from fixed image
use is not an operating defect and as such is not covered by Warranty. This
product is not designed to display fixed image patterns for extended periods
of time.
AUDIO
R L
TO AUDIO
AMP VIDEO
2
INPUT
1
1. Connect equipment as shown to front or rear Audio/Video input jacks.
Note: Front and rear Audio/Video connections (INPUT 2) cannot be operated at the
same time.
2. Select the Video mode by pressing TV/VIDEO button.
3. Operate optional equipment as instructed in equipment manual.
REGARDING USE
VCR
VIDEO OUT
L
AUDIO OUT
R
ANT IN ANT OUT
HPJ
Jack used for 1/8"
headpone plug
TERMINALS ON FRONT OF TV
I
NSTALLATION
OF VIDEO GAMES,
t
INPUT 2
VIDEO L AUDIO R
7