Specifications; Installation; Television Location; Customer Record - Panasonic CT-2016S Operating Instructions Manual

C
ONGRATULATIONS
Your new TV Monitor/Receiver features a solid
state chassis that is designed to give you many
years of enjoyment. It was thoroughly tested and
tuned at the factory for best performance.

Customer Record

The model and serial number of this product may
be found on the back of the unit. You should note
the model and serial number in the space provided
and retain as a permanent record of your
purchase. This will aid in identification in the event
of theft or loss. Product registration is available for
U.S. customers at:
www.prodreg.com/panasonic
Model
Number
Serial
Number

Care and Cleaning

Screen (Turn TV Off)
• Use a mild soap solution or window
cleaner with a soft clean cloth. DO NOT
USE ABRASIVE CLEANERS.
• Avoid excessive moisture and wipe dry.
Note: Do not spray any type of cleaning fluid
directly on the screen.
Cabinet and Remote Control
• Use a soft cloth dampened with water or
a mild detergent solution. Do not use
benzene, thinner, or other petroleum
based cleaners.
• Wipe dry with a soft clean cloth. Avoid
excessive moisture.

Specifications

Power Source
CT-13R32 (0.9A)
CT-13R42 (0.9A)
CT-20D11 (1.4A)
CT-2006S (1.4A)
CT-2016S (1.4A)
CT-20G6 (1.4A)
CT-20R6 (1.3A)
CT-25G6 (1.8A)
CT-25G6U (1.8A)
Channel Capability - 181
Video Input Jacks
(some models)
Audio Input Jacks
(some models)
To Audio AMP Jack
(some models)
Specifications are subject to change without notice
or obligation.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
:
WARNING
To reduce the risk of electric shock do not
remove cover or back. No user-serviceable parts inside.
Refer servicing to qualified service personnel.
The lightning flash with
arrow head within a
triangle is intended to
tell the user that parts
inside the product are a
risk of electric shock to
persons.
WARNING
To prevent fire or shock hazard, do
:
not expose this appliance to rain or moisture.
120V AC 60Hz
VHF-12 UHF-56
Cable-113
1V 75 Ohm Phono
p-p
Jack Type
500mV RMS 47K
Ohm
0-2.0V RMS 4.7K
Ohm
The exclamation point
within a triangle is intended
to tell the user that
important operating and
servicing instructions are in
the papers with the
appliance.
- 2 -
I
NSTALLATION

Television Location

Follow these recommendations before deciding the
location of your television.
r
Avoid excessive sunlight or bright lights,
including reflections.
r
Keep away from excessive heat or moisture.
Inadequate ventilation may cause internal
component failure.
r
Fluorescent lighting may reduce Remote
Control transmitting range.
r
Avoid magnetic equipment, including motors,
fans, or external speakers.
CAUTION:
Use this television
receiver only with the cart, stand,
tripod, bracket, or table specified by
the manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving
combination to avoid injury from tip-over. In order
to avoid injury to children, never place your
television receiver on a piece of furniture that is
capable of being tilted by a child leaning on it,
pulling on it, standing on it, or climbing on it.

AC Power Supply Cord

CAUTION: TO PREVENT
ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLET
AND FULLY INSERT.
WITH A RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADE CAN BE FULLY INSERTED
TO PREVENT BLADE EXPOSURE.
PROTECT POWER
WALKED ON, ROLLED OVER, CRIMPED, BENT
OR PINCHED, PARTICULARLY AT PLUGS,
CONVENIENCE RECEPTACLES,
POINT WHERE THEY
APPARATUS.
Batteries
• Replace batteries in pairs.
• Do not mix battery types (zinc carbon
with alkaline).
• Do not
disassemble,
batteries.

Optional Cable Connections

Shielded audio and video cables should be used
between components. For best results:
• Use 75-ohm coaxial shielded cables.
• Use appropriate input and output
connectors that match your component
connectors.
• Avoid long
interference.
Read these instructions completely before
operating TV.
Contents are subject to change without notice
or obligation.
the cart/apparatus
Polarized plug
DO NOT USE A PLUG
CORDS FROM BEING
AND THE
EXIT FROM THE
recharge, short-circuit,
heat, or burn used
cables to minimize