Siemens SINAMICS G130 Operating Instructions Manual page 14

General
CAUTION
Provisions for component cooling must be made at the installation site. Power loss data are
given in the technical specifications.
Note
It is permissible to set pulse frequencies in the range between the rated pulse frequency and
the relevant maximum pulse frequency when a dV/dt filter plus Voltage Peak Limiter is used.
When so doing, take into account the "Current derating as a function of the pulse frequency;
see Technical data.
12
dV/dt filter plus Voltage Peak Limiter
Operating Instructions, 03/2012, A5E00692302A