Panasonic Omnivision PV-D4733S Operating Instructions Manual page 21

*Important: If a remote control button does not work when pressed,
Record on a Tape
1 Insert a tape with a record tab (p. 6).
• DECK power comes on. If Auto VCR/TV (see p.32)
is set to "OFF," press VCR/TV on the remote to be
VCR mode.
2
Press CH , or NUMBER keys
to select the channel.
• For "LINE" input, see p. 35.
• If channel is over 100, press 100 key then press
the remaining 2 digits.
3 Press SPEED
to select the record speed (p. 6).
SP = Standard Play
SLP = Super Long Play
• Speed appears on-screen and on Multi Function Display.
Press REC
4
to start recording.
(The VCR REC indicator lights up on Multi Function
Display),
• To edit out unwanted scenes, press PAUSE/STILL
to pause, and again to resume recording.
• You cannot view another channel during recording.
5
Press STOP
to stop recording.
One Touch Recording (recording in progress),
➛ ➛ ➛ ➛ ➛ Press REC repeatedly to set the recording length
➛ ➛ ➛ ➛ ➛ (30 min. ~ 4 hours).
• DECK shuts off after the preset record length.
Record one station, watch another,
➛ ➛ ➛ ➛ ➛ press VCR/TV on the remote
(change to TV mode),
➛ ➛ ➛ ➛ ➛ select channels at TV (recording continues).
Select Channels at DECK (In STOP or
REC. PAUSE mode),
➛ ➛ ➛ ➛ ➛ press VCR/TV on the remote
(change to TV mode),
➛ ➛ ➛ ➛ ➛ select channels at DECK.
Play a disc while recording a tape.
➛ ➛ ➛ ➛ ➛ insert a disc during recording,
➛ ➛ ➛ ➛ ➛ press DVD , and then press PLAY .
Notes
• It is not possible to record from DVD/ Video
CD/ CD to VHS tape using DECK.
• Watching one channel and recording another
is not possible when using Cable Box or
DSS Receiver.
• After 5 minutes in Pause mode, DECK stops to
protect a tape and video heads.
press the VCR button on the remote and try the button again.
LP = Long Play
This video recorder, equipped with HQ
(High Quality) system, is compatible
with existing VHS equipment. Only use
tapes with the
tested and inspected for use in 2, 4, 6,
and 8 hour machines are
recommended.
Note
Remove loose or peeling
labels from tapes to prevent
tape jam.
Normal Rec
4:00 3:00
Record using DECK buttons
1
Insert a tape.
Multi Function Display
2
Select
Channel.
Press STOP/EJECT to stop.
mark. Only tapes
0:30 1:00
2:00 1:30
4
Press REC
to start
Recording.
21