Download Print this page

How To Use - Panasonic MX-EX1081 Operating Instructions Manual

Household use
Hide thumbs

Advertisement

Blender
To disassemble
Turn anticlockwise
2
Make sure the blender
1
gasket is not damaged
and placed properly
1
Place the ingredients into blender jug, and then close the lid.
■ ● Pour liquid first, followed by soft ingredients and then others.
)i( Liquid )ii( Soft ingredients )iii( Hard ingredients )iv( Ice cubes
2
Attach blender jug to the motor housing.
A lign the ▲ on the motor
housing with the
on the
blender jug.
Twist blender jug clockwise
until you hear a click sound.
B lender jug only can be attached by above steps.

3
Plug in. Hold the blender jug, and then turn the rotary
switch to "1" position to start.
■ ● If the appliance stops during
operation. (P. EN8)
4
When blending is completed, turn the rotary switch to
" 0 " position to switch off. Unplug.
Turn the blender jug
anticlockwise to remove it,
open the lid and take out the
ingredients.
How to use the scraper
■ ● It can be inserted through the lid opening while blending without
interfering with the blender blade.
■ ● Slide the scraper through the lid opening and scrape to remove food sticking to blender jug sides.
■ ● To avoid ingredients splattering, it is recommended to insert the scraper from the lid opening
when using blender jug.
Scraper is useful when
■ ● too little liquid makes ingredients hard to blend. (e.g. for dips, sauces, curry dishes)
■ ● ingredients stick to the inner side of container. (e.g. garlic, chile pepper)
EN6

How to Use

To assemble
Turn clockwise
1
before assemble.
3
3
1
Wet & Dry mill
To disassemble
Turn anticlockwise
2
3
2
1
1
Turn the mill container upside down and place the
ingredients in it. Twist the mill container base
clockwise until you hear a click sound.
2
Attach the mill container to the motor housing.
A lign the ▲ on the motor
1
housing with the
container.
2
T wist mill container clockwise
until you hear a click sound.
Mill container only can be attached by above steps.

3
2
Plug in. Hold the mill container, and then turn the rotary
switch to "1" position to start.
■ ● If the appliance stops during
operation. (P. EN8)
1
4
When blending is completed, turn the rotary switch to
" 0" position to switch off.
Unplug.
Turn the mill container
anticlockwise to remove it,
4
open the mill container,
and take out the
ingredients.
2
To assemble
Turn clockwise
Make sure the mill
gasket is not damaged
and placed properly
1
before assemble.
on the mill
4
3
1
2
Mill gasket
Mill container
2
1
2
1
3
2

Hide quick links:

Advertisement

loading