Related Manuals for Zimmer GPH8000 Series
Summary of Contents for Zimmer GPH8000 Series
- Page 1 Installation and operating instructions GPH8000 series 2-jaw parallel gripper, pneumatic DDOC00289 THE KNOW-HOW FACTORY www.zimmer-group.de...
-
Page 2: Table Of Contents
INSTALLATION AND OPERATING INSTRUCTIONS: 2-jaw parallel gripper, pneumatic, GPH8000 series Contents 1 Supporting documents ...............................3 2 Safety notes ..................................3 3 Proper use ....................................4 4 Personnel qualification ...............................4 5 Function ....................................4 6 Installation ....................................5 Installing the gripper ........................................5 Checking operational readiness ....................................5 Setting the stroke adjustment screw ..................................6... -
Page 3: Supporting Documents
• Local regulations (legislation, ordinances, guidelines), such as the EC Machinery Directive, accident prevention regulations and the installation and operating instructions, are not observed. 3. The gripper may be used only in accordance with its proper use and technical data. ZIMMER GmbH shall accept no liability for any damage caused by improper use. -
Page 4: Proper Use
2-jaw parallel gripper, pneumatic, GPH8000 series 3 Proper use NOTE: The GPH8000 series gripper should only be used in its original state with its original accessories, without any unauthorized changes and within the scope of its defined parameters for use. ZIMMER GmbH shall accept no liability for any damage caused by improper use. -
Page 5: Installation
INSTALLATION AND OPERATING INSTRUCTIONS: 2-jaw parallel gripper, pneumatic, GPH8000 series 6 Installation NOTE: Non-compliance may result in damage to the system Switch off the pneumatic energy supply before any assembly, installation or maintenance work. CAUTION: Non-compliance may result in damage to the system • Risk of injury in case of unexpected movement of the gripper when pneumatic energy is connected. -
Page 6: Setting The Stroke Adjustment Screw
INSTALLATION AND OPERATING INSTRUCTIONS: 2-jaw parallel gripper, pneumatic, GPH8000 series 6.3 Using the stroke adjustment screw Synchronous: ► Set the first side. ► Move to the limit stop. ► Set the second side. • Secure the stroke adjustment screw using a threadlocker suitable for such use. -
Page 7: Installing The Example Gph8000
INSTALLATION AND OPERATING INSTRUCTIONS: 2-jaw parallel gripper, pneumatic, GPH8000 series An example depiction of an adapter piece can be viewed in the following image. Outer installation of the adapter piece for the outer end position. • Secure the stroke adjustment screw and spacer with a screw locking device suitable for the application. -
Page 8: Installation Of Accessories
• Improper use and use that does not comply with the performance data. • Ambient temperature of more than 60°C; lubricants harden faster! We recommend using the ZIMMER GmbH repair service for maintenance and the replacement of seals. Dismantling and reassembling the gripper without authorization may result in complications, as special installation equipment is required in some cases. -
Page 9: Declaration Of Incorporation
In terms of the EU Machinery Directive 2006/42/EC (Annex II 1 B). Name and address of the manufacturer: ZIMMER GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • Phone: +49 7844 9138 0 • Fax: +49 7844 9138 80 • www.zimmer-group.de... -
Page 10: Your Notes
INSTALLATION AND OPERATING INSTRUCTIONS: 2-jaw parallel gripper, pneumatic, GPH8000 series 10 Your notes ZIMMER GmbH Im Salmenkopf 5 77866 Rheinau, Germany Phone: +49 7844 9138 0 Fax: +49 7844 9138 80 www.zimmer-group.de ● ● ● ● ●... - Page 11 INSTALLATION AND OPERATING INSTRUCTIONS: 2-jaw parallel gripper, pneumatic, GPH8000 series ZIMMER GmbH Im Salmenkopf 5 77866 Rheinau, Germany Phone: +49 7844 9138 0 Fax: +49 7844 9138 80 www.zimmer-group.de ● ● ● ● ●...
- Page 12 INSTALLATION AND OPERATING INSTRUCTIONS: 2-jaw parallel gripper, pneumatic, GPH8000 series ZIMMER GmbH Im Salmenkopf 5 77866 Rheinau, Germany Phone: +49 7844 9138 0 Fax: +49 7844 9138 80 www.zimmer-group.de ● ● ● ● ●...
Need help?
Do you have a question about the GPH8000 Series and is the answer not in the manual?
Questions and answers