End A Call; Hold And Resume A Call - Cisco 6800 Series User Manual

Calls
• To reject the call, press Decline. The call is sent to voicemail, if configured.
Silence an Incoming Call
If you don't want to answer a call, you can decline or ignore the calls. If you decline the call, the caller hear
less ring cycle. If you ignore the call, the caller hears the complete ring cycle.
The call will transfer to your voicemail, if voicemail is configured.
Procedure
When a call is ringing,
• Press Decline to immediately send the call to voicemail (if configured).
• 6825 Handset only: Press Ignore to silence the ringer. If the call is not answered, then it is sent to

End a Call

Procedure
Press Power/End

Hold and Resume a Call

You can put a call on hold and then resume it.
Procedure
Step 1 From an active call, press Hold.
Step 2
Press Resume to pick the call back up.
Swap Between Active and Held Calls
When you have an active call and a held call, you can easily swap the calls. The current active call goes on
hold and the previously held call becomes the active call.
voicemail (if configured).
.
Silence an Incoming Call
Calls
7